Infrared cutting machine, also known as infrared bridge cutting machine, is mainly used for stone infrared cutting, CNC infrared cutting, infrared glass cutting, infrared plastic cutting, roughly cut and polished rough board, plastic, glass, cement board, etc., according to The standard specification board required for fast, accurate and continuous cutting is required.
This machine is a high-precision cutting machine, and a professional technician is required to be present for technical guidance and install it in accordance with the equipment procedure. In order to ensure the reliability of the construction period, the inspection must be carried out according to the specified indicators after installation.
1. The maintenance of electrical parts should be checked and repaired by qualified electrical maintenance personnel. It is strictly forbidden to open the electrical control box by idle personnel to avoid danger or damage to the electrical control part;
2. Applicable manufacturers to ensure stable power supply voltage and reliable limits;
3. A circuit breaker should be installed on the power entry line, and the power supply should be cut off during maintenance to avoid the risk of electric shock;
4. When the machine is in use, the main power supply of the machine should be cut off to ensure safety;
5. The electric control box and hydraulic station of the machine should be properly waterproofed, and water should not be exposed to it, so as to avoid damage to the electric control part;